{"title":"MOVFE","description":"\u003cp\u003eMOVFE door operator parts.\u003c\/p\u003e","products":[{"product_id":"gdo-6-pickup-roller","title":"GAL Pickup Roller GDO-6","description":"\u003cp data-path-to-node=\"1\"\u003eThe \u003cstrong\u003eINT1H-0023N\u003c\/strong\u003e is a replacement door clutch (clutch\/coupler) roller designed for use on \u003cb data-path-to-node=\"1\" data-index-in-node=\"83\"\u003eGAL (G.A.L. Manufacturing)\u003c\/b\u003e door equipment. It is one of the most common wear items in the door system, as it physically interfaces with the hoistway door rollers at every landing.\u003c\/p\u003e\n\u003cul data-path-to-node=\"2\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,0,0\"\u003e\u003cb data-path-to-node=\"2,0,0\" data-index-in-node=\"0\"\u003eManufacturer:\u003c\/b\u003e S.E.E.S. (Southern Elevator \u0026amp; Electric Supply)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,1,0\"\u003e\u003cb data-path-to-node=\"2,1,0\" data-index-in-node=\"0\"\u003eOEM Reference:\u003c\/b\u003e GAL (G.A.L. Manufacturing)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,2,0\"\u003e\u003cb data-path-to-node=\"2,2,0\" data-index-in-node=\"0\"\u003eApplication:\u003c\/b\u003e Used on \u003cb data-path-to-node=\"2,2,0\" data-index-in-node=\"21\"\u003eGAL \"MO,\" \"MOM,\" and \"MOVFE\"\u003c\/b\u003e door operators.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,3,0\"\u003e\u003cb data-path-to-node=\"2,3,0\" data-index-in-node=\"0\"\u003eConstruction:\u003c\/b\u003e Typically made of high-impact molded nylon or polyurethane with a precision-sealed ball bearing center to ensure smooth and quiet operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,4,0\"\u003e\u003cb data-path-to-node=\"2,4,0\" data-index-in-node=\"0\"\u003eDimensions:\u003c\/b\u003e Standard \u003cb data-path-to-node=\"2,4,0\" data-index-in-node=\"21\"\u003e2\" (50.8 mm)\u003c\/b\u003e diameter with a \u003cb data-path-to-node=\"2,4,0\" data-index-in-node=\"50\"\u003e3\/8\" (9.5 mm)\u003c\/b\u003e bore.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,5,0\"\u003e\u003cb data-path-to-node=\"2,5,0\" data-index-in-node=\"0\"\u003eFunction:\u003c\/b\u003e Mounted on the car door clutch assembly, these rollers \"pick up\" the hoistway door rollers as the car arrives at the floor, allowing the car door operator to drive both the car and hoistway doors simultaneously.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"R.A.M. Parts","offers":[{"title":"Default Title","offer_id":48162415771800,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/files\/rn-image_picker_lib_temp_dcfafbb2-62bc-4bdb-835f-bcb954859762.jpg?v=1771884231"},{"product_id":"gdo-35a-door-op-hard-stop-black","title":"GAL door op hard stop (black) GDO-35A","description":"\u003cp data-path-to-node=\"1\"\u003eThe \u003cstrong\u003eOP10-0032N\u003c\/strong\u003e is a mechanical \u003cb data-path-to-node=\"1\" data-index-in-node=\"28\"\u003ehard stop\u003c\/b\u003e (often referred to as a \"stop block\" or \"bumper\") designed for \u003cb data-path-to-node=\"1\" data-index-in-node=\"101\"\u003eGAL door operators\u003c\/b\u003e. Unlike the GDO-35 (which is a cam), the \"A\" suffix typically denotes this heavy-duty stop component used to physically limit the travel of the door linkage.\u003c\/p\u003e\n\u003cul data-path-to-node=\"2\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,0,0\"\u003e\u003cb data-path-to-node=\"2,0,0\" data-index-in-node=\"0\"\u003eManufacturer:\u003c\/b\u003e S.E.E.S. (Southern Elevator \u0026amp; Electric Supply)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,1,0\"\u003e\u003cb data-path-to-node=\"2,1,0\" data-index-in-node=\"0\"\u003eOEM Reference:\u003c\/b\u003e GAL (G.A.L. Manufacturing)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,2,0\"\u003e\u003cb data-path-to-node=\"2,2,0\" data-index-in-node=\"0\"\u003eApplication:\u003c\/b\u003e Used on \u003cb data-path-to-node=\"2,2,0\" data-index-in-node=\"21\"\u003eGAL MOM\u003c\/b\u003e and \u003cb data-path-to-node=\"2,2,0\" data-index-in-node=\"33\"\u003eMOVFE (Harmonic)\u003c\/b\u003e door operators.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,3,0\"\u003e\u003cb data-path-to-node=\"2,3,0\" data-index-in-node=\"0\"\u003eConstruction:\u003c\/b\u003e Heavy-duty steel or cast block, often fitted with a resilient rubber or polyurethane bumper to absorb impact.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,4,0\"\u003e\u003cb data-path-to-node=\"2,4,0\" data-index-in-node=\"0\"\u003eFunction:\u003c\/b\u003e Provides a positive mechanical stop at the end of the door's opening or closing stroke. This prevents the linkage from \"over-centering\" or putting excessive strain on the motor and drive belt\/chain.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,5,0\"\u003e\u003cb data-path-to-node=\"2,5,0\" data-index-in-node=\"0\"\u003eCompatibility Note (MOVFE):\u003c\/b\u003e This hard stop is specific to the \u003cb data-path-to-node=\"2,5,0\" data-index-in-node=\"62\"\u003eHarmonic (Crank-Arm)\u003c\/b\u003e version of the MOVFE. The Linear MOVFE uses different stop arrangements integrated into the track and trolley system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"R.A.M. Parts","offers":[{"title":"Default Title","offer_id":48162474295448,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/files\/rn-image_picker_lib_temp_12bd39fd-f66c-4b06-a344-dbfabc113bfb.jpg?v=1771884071"},{"product_id":"gdo-37-small-bridging-cam-assembly","title":"GAL small bridging cam assembly GDO-37","description":"\u003cp data-path-to-node=\"1\"\u003eS.E.E.S. GDO-37 small bridging cam assembly designed for use on \u003cb data-path-to-node=\"1\" data-index-in-node=\"64\"\u003eGAL door operators\u003c\/b\u003e. This mechanical cam is the smaller counterpart to the GDO-36 and is mounted on the operator's cam tree to actuate the limit switches and bridge the safety circuit during the door cycle.\u003c\/p\u003e\n\u003cul data-path-to-node=\"2\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,0,0\"\u003e\u003cb data-path-to-node=\"2,0,0\" data-index-in-node=\"0\"\u003eManufacturer:\u003c\/b\u003e S.E.E.S. (Southern Elevator \u0026amp; Electric Supply)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,1,0\"\u003e\u003cb data-path-to-node=\"2,1,0\" data-index-in-node=\"0\"\u003eOEM Reference:\u003c\/b\u003e GAL (G.A.L. Manufacturing)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,2,0\"\u003e\u003cb data-path-to-node=\"2,2,0\" data-index-in-node=\"0\"\u003eApplication:\u003c\/b\u003e Specifically for GAL \"MOM\" and \u003cb data-path-to-node=\"2,2,0\" data-index-in-node=\"44\"\u003eMOVFE (Harmonic\/Crank-Arm)\u003c\/b\u003e door operators.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,3,0\"\u003e\u003cb data-path-to-node=\"2,3,0\" data-index-in-node=\"0\"\u003eFunction:\u003c\/b\u003e Provides precise mechanical timing to trip microswitches for \"Slow-down,\" \"Close Limit,\" or \"Gate Switch\" signals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,4,0\"\u003e\u003cb data-path-to-node=\"2,4,0\" data-index-in-node=\"0\"\u003eCompatibility Note (MOVFE):\u003c\/b\u003e This part is \u003cb data-path-to-node=\"2,4,0\" data-index-in-node=\"41\"\u003ecompatible only with the Harmonic MOVFE\u003c\/b\u003e. If you have a \u003cb data-path-to-node=\"2,4,0\" data-index-in-node=\"96\"\u003eLinear MOVFE\u003c\/b\u003e, it uses electronic software limits and an encoder instead of these mechanical cams.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"R.A.M. Parts","offers":[{"title":"Default Title","offer_id":48162610905240,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/files\/rn-image_picker_lib_temp_5c172cea-9010-4edd-b011-b49d8b12e04c.jpg?v=1771883815"},{"product_id":"gdo-36-large-bridging-cam-assembly","title":"GAL large bridging cam assembly GDO-36","description":"\u003cp data-path-to-node=\"1\"\u003e OP10-0009N large bridging cam assembly that is designed for use on \u003cb data-path-to-node=\"1\" data-index-in-node=\"72\"\u003eGAL door operators\u003c\/b\u003e. This heavy-duty cam is used to actuate the bridging switches on the operator’s cam tree, ensuring the safety circuit remains properly sequenced during the door opening and closing cycles.\u003c\/p\u003e\n\u003cul data-path-to-node=\"2\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,0,0\"\u003e\u003cb data-path-to-node=\"2,0,0\" data-index-in-node=\"0\"\u003eManufacturer:\u003c\/b\u003e S.E.E.S. (Southern Elevator \u0026amp; Electric Supply)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,1,0\"\u003e\u003cb data-path-to-node=\"2,1,0\" data-index-in-node=\"0\"\u003eOEM Reference:\u003c\/b\u003e GAL (G.A.L. Manufacturing)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,2,0\"\u003e\u003cb data-path-to-node=\"2,2,0\" data-index-in-node=\"0\"\u003eApplication:\u003c\/b\u003e Used on GAL \"MOM\" and \"MOVFR\" (Harmonic) door operators.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,3,0\"\u003e\u003cb data-path-to-node=\"2,3,0\" data-index-in-node=\"0\"\u003eMaterial:\u003c\/b\u003e Precision-stamped or cast steel for long-term durability under high-cycle usage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,4,0\"\u003e\u003cb data-path-to-node=\"2,4,0\" data-index-in-node=\"0\"\u003eCompatibility:\u003c\/b\u003e Specifically designed for the \"Harmonic\" style operators that utilize a rotating cam tree; not used on newer Linear (belt-driven) MOVFE\/2500 series operators.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"R.A.M. Parts","offers":[{"title":"Default Title","offer_id":48162615951512,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/files\/rn-image_picker_lib_temp_7ce89c18-6145-4743-a976-a4da05fdaa4c.jpg?v=1771883782"},{"product_id":"eci-2500-3055","title":"ECI 2500-3055 Additional I\/O Board","description":"\u003cp data-path-to-node=\"1\"\u003eThe \u003cb data-path-to-node=\"1\" data-index-in-node=\"4\"\u003eECI 2500-3055\u003c\/b\u003e is an optical position-sensing board used in \u003cb data-path-to-node=\"1\" data-index-in-node=\"63\"\u003eElectronic Controls, Inc.\u003c\/b\u003e door operator systems. It is the \"twin\" or precursor to the 3056 model, typically utilized to monitor the rotation of the motor or drive shaft. In Canadian elevator maintenance, this assembly is essential for defining the \u003cb data-path-to-node=\"1\" data-index-in-node=\"311\"\u003eSlowdown\u003c\/b\u003e and \u003cb data-path-to-node=\"1\" data-index-in-node=\"324\"\u003eLimit\u003c\/b\u003e points for the door cycle, replacing the need for traditional mechanical \"micro-switches.\"\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003e\u003cb data-path-to-node=\"2\" data-index-in-node=\"0\"\u003eCore Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"3\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,0,0\"\u003e\u003cb data-path-to-node=\"3,0,0\" data-index-in-node=\"0\"\u003ePart Number:\u003c\/b\u003e 2500-3055\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,1,0\"\u003e\u003cb data-path-to-node=\"3,1,0\" data-index-in-node=\"0\"\u003eDescription:\u003c\/b\u003e Optical Cam \/ Speed Sensor Board\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,2,0\"\u003e\u003cb data-path-to-node=\"3,2,0\" data-index-in-node=\"0\"\u003eSensor Type:\u003c\/b\u003e Dual Infrared (IR) Photo-interrupters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,3,0\"\u003e\u003cb data-path-to-node=\"3,3,0\" data-index-in-node=\"0\"\u003eLogic Voltage:\u003c\/b\u003e \u003cb data-path-to-node=\"3,3,0\" data-index-in-node=\"15\"\u003e24V DC\u003c\/b\u003e (Supplied by the door operator controller)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,4,0\"\u003e\u003cb data-path-to-node=\"3,4,0\" data-index-in-node=\"0\"\u003eOutput Type:\u003c\/b\u003e Sourcing\/Sinking pulses based on cam slot interruption\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,5,0\"\u003e\u003cb data-path-to-node=\"3,5,0\" data-index-in-node=\"0\"\u003eCompatibility:\u003c\/b\u003e ECI-1000, ECI-1000U, and older VFE\/Mover operators\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"4\"\u003e\n\u003ch3 data-path-to-node=\"5\"\u003e\u003cb data-path-to-node=\"5\" data-index-in-node=\"0\"\u003eElevator Logic (Feedback \u0026amp; Limits)\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"6\"\u003eThis board translates the mechanical rotation of the operator into digital signals used by the drive's CPU:\u003c\/p\u003e\n\u003cul data-path-to-node=\"7\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,0,0\"\u003e\u003cb data-path-to-node=\"7,0,0\" data-index-in-node=\"0\"\u003eDigital Limits:\u003c\/b\u003e It generates the \u003cb data-path-to-node=\"7,0,0\" data-index-in-node=\"33\"\u003eDOL (Door Open Limit)\u003c\/b\u003e and \u003cb data-path-to-node=\"7,0,0\" data-index-in-node=\"59\"\u003eDCL (Door Close Limit)\u003c\/b\u003e. Once the sensors detect the solid portion of the cam, the board signals the controller to kill high-speed power.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,1,0\"\u003e\u003cb data-path-to-node=\"7,1,0\" data-index-in-node=\"0\"\u003eSlowdown Detection:\u003c\/b\u003e It identifies the transition from high-speed travel to \"creep speed,\" ensuring the door arrives at the bumpers gently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,2,0\"\u003e\u003cb data-path-to-node=\"7,2,0\" data-index-in-node=\"0\"\u003eStall Protection:\u003c\/b\u003e If the motor is energized but the 2500-3055 does not detect pulses (meaning the cam isn't turning), the board allows the controller to trigger a \u003cb data-path-to-node=\"7,2,0\" data-index-in-node=\"163\"\u003eStall Fault\u003c\/b\u003e to protect the motor windings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"8\"\u003e\n\u003ch3 data-path-to-node=\"9\"\u003e\u003cb data-path-to-node=\"9\" data-index-in-node=\"0\"\u003eAccessories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eThe 2500-3055 operates as part of a modular feedback loop:\u003c\/p\u003e\n\u003cp data-path-to-node=\"11\"\u003e\u003cb data-path-to-node=\"11\" data-index-in-node=\"0\"\u003eMechanical Interface\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"12\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,0,0\"\u003e\u003cb data-path-to-node=\"12,0,0\" data-index-in-node=\"0\"\u003eSlotted Cam \/ Encoder Disc:\u003c\/b\u003e The physical disc that rotates through the sensors. Note that different cam profiles (number of slots) are used depending on whether the operator is a \"Long Stroke\" or \"Short Stroke\" design.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,1,0\"\u003e\u003cb data-path-to-node=\"12,1,0\" data-index-in-node=\"0\"\u003eMounting Brackets:\u003c\/b\u003e Specifically designed to align the sensors perfectly over the center of the rotating cam.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"13\"\u003e\u003cb data-path-to-node=\"13\" data-index-in-node=\"0\"\u003eInterconnects\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003eHarness Assembly:\u003c\/b\u003e Multi-pin connector that carries the 24V supply and returns the pulse signals to the \u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"103\"\u003eECI-1000\u003c\/b\u003e main board.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"15\"\u003e\n\u003ch3 data-path-to-node=\"16\"\u003e\u003cb data-path-to-node=\"16\" data-index-in-node=\"0\"\u003eField Maintenance \u0026amp; Canadian Code Notes\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"17\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"17,0,0\"\u003e\u003cb data-path-to-node=\"17,0,0\" data-index-in-node=\"0\"\u003eCleaning Requirements:\u003c\/b\u003e These boards are highly sensitive to \u003cb data-path-to-node=\"17,0,0\" data-index-in-node=\"60\"\u003eCarbon Dust\u003c\/b\u003e from the DC motor brushes. In Canadian machine-room-less (MRL) or tight hoistway applications, dust buildup on the IR sensors will cause \"Short-cycling\" or the doors to reverse unexpectedly. Clean only with dry air or an electronics-safe swab.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"17,1,0\"\u003e\u003cb data-path-to-node=\"17,1,0\" data-index-in-node=\"0\"\u003eB44 Compliance:\u003c\/b\u003e The \u003cb data-path-to-node=\"17,1,0\" data-index-in-node=\"20\"\u003eCSA B44\u003c\/b\u003e code requires precise control over door kinetic energy. If this board sends \"dirty\" signals (due to a loose cam or dusty sensor), the door speed may become erratic, potentially exceeding the \u003cb data-path-to-node=\"17,1,0\" data-index-in-node=\"219\"\u003e10 Joule\u003c\/b\u003e energy limit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"17,2,0\"\u003e\u003cb data-path-to-node=\"17,2,0\" data-index-in-node=\"0\"\u003eAlignment Check:\u003c\/b\u003e If the door fails to find its \"Home\" position or doesn't slow down, verify the cam disc isn't wobbling. A wobbling disc will clip the edges of the 2500-3055 sensors, leading to intermittent signal loss.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"17,3,0\"\u003e\u003cb data-path-to-node=\"17,3,0\" data-index-in-node=\"0\"\u003eVoltage Testing:\u003c\/b\u003e You should measure a steady \u003cb data-path-to-node=\"17,3,0\" data-index-in-node=\"45\"\u003e24V DC\u003c\/b\u003e at the power pins. When manually turning the motor, the signal pins should toggle between roughly \u003cb data-path-to-node=\"17,3,0\" data-index-in-node=\"150\"\u003e0V and 24V\u003c\/b\u003e as the slots pass through the sensors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"R.A.M. Parts","offers":[{"title":"Default Title","offer_id":48172000379032,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/files\/rn-image_picker_lib_temp_077038e1-b757-4c0b-8b6c-b80e0f94c0c9.jpg?v=1772053126"},{"product_id":"vfe-2500-3056-optical-cam-board-assembly","title":"VFE 2500-3056 Optical cam board assembly","description":"\u003cp data-path-to-node=\"1\"\u003eThe \u003cb data-path-to-node=\"1\" data-index-in-node=\"4\"\u003eVFE 2500-3056\u003c\/b\u003e is a critical feedback component used primarily with \u003cb data-path-to-node=\"1\" data-index-in-node=\"71\"\u003eElectronic Controls, Inc. (ECI)\u003c\/b\u003e door operators. It serves as the \"eyes\" of the operator, utilizing optical sensors to track the physical position of the door throughout its travel. In Canada, this assembly is a common sight in \u003cb data-path-to-node=\"1\" data-index-in-node=\"298\"\u003eThyssenKrupp (TKE)\u003c\/b\u003e and \u003cb data-path-to-node=\"1\" data-index-in-node=\"321\"\u003eECI-modernized\u003c\/b\u003e high-rise traction units.\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003e\u003cb data-path-to-node=\"2\" data-index-in-node=\"0\"\u003eCore Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"3\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,0,0\"\u003e\u003cb data-path-to-node=\"3,0,0\" data-index-in-node=\"0\"\u003ePart Number:\u003c\/b\u003e 2500-3056\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,1,0\"\u003e\u003cb data-path-to-node=\"3,1,0\" data-index-in-node=\"0\"\u003eDescription:\u003c\/b\u003e Optical Cam \/ Encoder Board Assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,2,0\"\u003e\u003cb data-path-to-node=\"3,2,0\" data-index-in-node=\"0\"\u003eSensor Type:\u003c\/b\u003e Infrared (IR) Photo-interrupters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,3,0\"\u003e\u003cb data-path-to-node=\"3,3,0\" data-index-in-node=\"0\"\u003eVoltage:\u003c\/b\u003e \u003cb data-path-to-node=\"3,3,0\" data-index-in-node=\"9\"\u003e24V DC\u003c\/b\u003e (Standard logic supply from the ECI-1000\/VFE-2000 board)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,4,0\"\u003e\u003cb data-path-to-node=\"3,4,0\" data-index-in-node=\"0\"\u003eCompatibility:\u003c\/b\u003e ECI-1000, ECI-2000, and VFE series door operators\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"3,5,0\"\u003e\u003cb data-path-to-node=\"3,5,0\" data-index-in-node=\"0\"\u003eMounting:\u003c\/b\u003e Direct-mount to the operator motor shaft or gearbox assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"4\"\u003e\n\u003ch3 data-path-to-node=\"5\"\u003e\u003cb data-path-to-node=\"5\" data-index-in-node=\"0\"\u003eElevator Logic (Position Feedback)\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"6\"\u003eUnlike mechanical limit switches, the 2500-3056 provides continuous positioning data to the door controller:\u003c\/p\u003e\n\u003cul data-path-to-node=\"7\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,0,0\"\u003e\u003cb data-path-to-node=\"7,0,0\" data-index-in-node=\"0\"\u003eSlowdown Points:\u003c\/b\u003e The board identifies where the door should begin its deceleration profile for both opening and closing cycles.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,1,0\"\u003e\u003cb data-path-to-node=\"7,1,0\" data-index-in-node=\"0\"\u003eLimit Signals:\u003c\/b\u003e It generates the virtual \u003cb data-path-to-node=\"7,1,0\" data-index-in-node=\"40\"\u003eDOL (Door Open Limit)\u003c\/b\u003e and \u003cb data-path-to-node=\"7,1,0\" data-index-in-node=\"66\"\u003eDCL (Door Close Limit)\u003c\/b\u003e signals sent back to the main elevator controller.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,2,0\"\u003e\u003cb data-path-to-node=\"7,2,0\" data-index-in-node=\"0\"\u003eVelocity Tracking:\u003c\/b\u003e By monitoring the \"slots\" in the rotating cam, the board allows the drive to calculate door speed, ensuring the \u003cb data-path-to-node=\"7,2,0\" data-index-in-node=\"131\"\u003eKinetic Energy\u003c\/b\u003e remains within safe limits.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"8\"\u003e\n\u003ch3 data-path-to-node=\"9\"\u003e\u003cb data-path-to-node=\"9\" data-index-in-node=\"0\"\u003eAccessories\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eThe optical board works in tandem with several mechanical and electrical components:\u003c\/p\u003e\n\u003cp data-path-to-node=\"11\"\u003e\u003cb data-path-to-node=\"11\" data-index-in-node=\"0\"\u003eCam Discs\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"12\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,0,0\"\u003e\u003cb data-path-to-node=\"12,0,0\" data-index-in-node=\"0\"\u003eSlotted Cam Disc:\u003c\/b\u003e The plastic or metal disc that passes through the optical sensors. If these slots are clogged with dust or debris, the door will \"lose its place.\"\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"13\"\u003e\u003cb data-path-to-node=\"13\" data-index-in-node=\"0\"\u003eInterface Cables\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003eRibbon Cable \/ Harness:\u003c\/b\u003e Connects the 2500-3056 to the main door operator board. A frayed cable here often causes intermittent \"Door Fault\" or \"Stall\" errors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eOperator Boards (Matching)\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"16\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"16,0,0\"\u003e\u003cb data-path-to-node=\"16,0,0\" data-index-in-node=\"0\"\u003eECI-1000U:\u003c\/b\u003e The universal control board that interprets the pulses from this optical assembly to manage the 48V DC motor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"17\"\u003e\n\u003ch3 data-path-to-node=\"18\"\u003e\u003cb data-path-to-node=\"18\" data-index-in-node=\"0\"\u003eField Maintenance \u0026amp; Canadian Code Notes\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul data-path-to-node=\"19\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"19,0,0\"\u003e\u003cb data-path-to-node=\"19,0,0\" data-index-in-node=\"0\"\u003eB44 Door Monitoring:\u003c\/b\u003e Under \u003cb data-path-to-node=\"19,0,0\" data-index-in-node=\"27\"\u003eCSA B44\u003c\/b\u003e, the door system must monitor position to ensure it doesn't exceed force limits. If the 2500-3056 fails, the operator typically defaults to a \"Learn Mode\" or \"Nudging\" speed to prevent high-speed impact with passengers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"19,1,0\"\u003e\u003cb data-path-to-node=\"19,1,0\" data-index-in-node=\"0\"\u003eEnvironmental Sensitivity:\u003c\/b\u003e Because it is an \u003cb data-path-to-node=\"19,1,0\" data-index-in-node=\"44\"\u003eoptical\u003c\/b\u003e device, it is highly susceptible to carbon dust (from motor brushes) and construction debris. \u003cb data-path-to-node=\"19,1,0\" data-index-in-node=\"146\"\u003eField Tip:\u003c\/b\u003e Clean the sensors with canned air or a soft brush; never use oily cleaners which will attract more dust and cause \"ghost\" limit trips.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"19,2,0\"\u003e\u003cb data-path-to-node=\"19,2,0\" data-index-in-node=\"0\"\u003eAlignment:\u003c\/b\u003e Ensure the cam disc is centered within the \"U\" of the optical sensors. If the disc rubs against the sensor housing, it will eventually wear through the PCB traces, leading to a total failure of the Open\/Close limits.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"19,3,0\"\u003e\u003cb data-path-to-node=\"19,3,0\" data-index-in-node=\"0\"\u003eTroubleshooting:\u003c\/b\u003e If the door is slamming into the rubber bumpers at high speed, the 2500-3056 is likely not sending the \"Slowdown\" pulse. Check the \u003cb data-path-to-node=\"19,3,0\" data-index-in-node=\"148\"\u003eLED status lights\u003c\/b\u003e on the board (if equipped) to verify the sensors are toggling as the motor turns.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"R.A.M. Parts","offers":[{"title":"Default Title","offer_id":48172016468120,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/files\/rn-image_picker_lib_temp_031589c2-b9eb-44d1-8241-4f00a2a4fc33.jpg?v=1772053008"},{"product_id":"spirator-kone","title":"Spirators","description":"","brand":"R.A.M. Parts","offers":[{"title":"Smartorx","offer_id":49249086472344,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false},{"title":"A831","offer_id":49249086505112,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false},{"title":"Kone MS-124F","offer_id":49249086537880,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/files\/rn-image_picker_lib_temp_34c22d78-c686-414a-a6f3-1372d1803c2a.jpg?v=1781542392"},{"product_id":"movfe-230v-2500-3050-drive-pcb-assembly","title":"MOVFE 230V 2500-3050 DRIVE\/PCB Assembly","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,0,0\"\u003e\u003cb data-path-to-node=\"1,0,0\" data-index-in-node=\"0\"\u003eManufacturer:\u003c\/b\u003e GAL Manufacturing (Vantage Elevation)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,1,0\"\u003e\u003cb data-path-to-node=\"1,1,0\" data-index-in-node=\"0\"\u003ePart Number:\u003c\/b\u003e 2500-3050 (Component of the MOVFE \/ MOVFE 2500 series)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,2,0\"\u003e\u003cb data-path-to-node=\"1,2,0\" data-index-in-node=\"0\"\u003eComponent Type:\u003c\/b\u003e Integrated VVVF Door Operator Drive \u0026amp; Logic PCB Assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,3,0\"\u003e\u003cb data-path-to-node=\"1,3,0\" data-index-in-node=\"0\"\u003eInput Voltage Compatibility:\u003c\/b\u003e 230VAC Single-Phase\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"1,4,0\"\u003e\u003cb data-path-to-node=\"1,4,0\" data-index-in-node=\"0\"\u003eMain Drive Motor Support:\u003c\/b\u003e Engineered for driving standard heavy-duty 1\/2 HP AC asynchronous linear door motors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"R.A.M. Parts","offers":[{"title":"Default Title","offer_id":49331743129752,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/files\/rn-image_picker_lib_temp_7f8d4478-5840-40a4-a68d-2fe38baf3fd0.jpg?v=1782488524"},{"product_id":"movfe-u-bolt-3-8-chain-holder","title":"MOVFE U-BOLT 3\/8 Chain holder","description":"\u003cp data-path-to-node=\"1\"\u003eThe \u003cb data-path-to-node=\"1\" data-index-in-node=\"4\"\u003eGAL MOVFE U-Bolt 3\/8\" Chain Holder Assembly\u003c\/b\u003e is a heavy-duty mechanical retaining fastener engineered specifically for the drive mechanism of GAL MOVFE series linear door operators. It provides a secure, non-slip anchoring point that clamps the door drive chain directly to the operator's carriage assembly.\u003c\/p\u003e\n\u003cul data-path-to-node=\"2\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,0,0\"\u003e\u003cb data-path-to-node=\"2,0,0\" data-index-in-node=\"0\"\u003eManufacturer:\u003c\/b\u003e GAL Manufacturing (Vantage Group)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,1,0\"\u003e\u003cb data-path-to-node=\"2,1,0\" data-index-in-node=\"0\"\u003eApplication:\u003c\/b\u003e GAL MOVFE \/ MOVFE-HL Linear Door Operators\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,2,0\"\u003e\u003cb data-path-to-node=\"2,2,0\" data-index-in-node=\"0\"\u003eComponent Type:\u003c\/b\u003e Drive Chain Retainer \/ Tension Anchor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,3,0\"\u003e\u003cb data-path-to-node=\"2,3,0\" data-index-in-node=\"0\"\u003eThread Diameter:\u003c\/b\u003e 3\/8\" nominal (UNC heavy thread profile)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,4,0\"\u003e\u003cb data-path-to-node=\"2,4,0\" data-index-in-node=\"0\"\u003eMaterial Construction:\u003c\/b\u003e High-tensile zinc-plated steel for superior shear strength and corrosion resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"2,5,0\"\u003e\u003cb data-path-to-node=\"2,5,0\" data-index-in-node=\"0\"\u003eInclusions:\u003c\/b\u003e Precision-formed U-bolt bracket matching the chain pitch profiles, standard backing plate\/bracket seat, and heavy hex locking nuts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"R.A.M. Parts","offers":[{"title":"Default Title","offer_id":49425912070296,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/files\/rn-image_picker_lib_temp_6091482a-3f09-4203-a085-e9a0958efd13.jpg?v=1783718058"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/4369\/5000\/collections\/MOVFE_door_operator.png?v=1781546213","url":"https:\/\/parts4rem.ca\/collections\/movfe.oembed","provider":"Parts4REM","version":"1.0","type":"link"}